Compare electricity providers in Fort Worth, Texas

Fort Worth is the Tarrant County anchor of western DFW—and for most in-city addresses you still shop retail electric providers while a regulated TDU maintains the grid. The provider you pick sets your supply product; it does not replace the delivery utility that restores outages and reads the meter in many neighborhoods.

City research for this page was last verified 2026-06-05. Shared page disclosures and tool notes were reviewed 2026-11-11. Plan prices in the comparison tool below are live partner listings at the moment you search—they are not a static table on this page. Dollar amounts on the Fort Worth utility estimate use that page's own last-verified date and are a budget benchmark, not an enrollment offer.

Can I choose an electricity provider in Fort Worth?

Oncor Electric Delivery (TDU Delivery – DFW area) delivers electricity. You choose a retail electric provider for the supply price, contract length, and fees.

The comparison tool applies when your bill shows that delivery utility and a retail provider you can switch. Municipal utilities and cooperatives in or near Fort Worth are a different arrangement. If the bill names one of those, do not use a retail plan.

Compare Fort Worth, TX electricity plans

See current plans, pricing, and contract options available for eligible Texas service addresses. Compare the total price at your expected usage and review the Electricity Facts Label before enrolling.

Rates shown after you search are up to date at that moment. Results are address-specific, and plan availability, usage credits, fees, and contract terms can change the total—including later the same day. Review the provider's Electricity Facts Label and Terms of Service before enrolling.

Utility Rates may receive compensation when you use this comparison tool. Compensation does not change our city utility research, source selection, or editorial explanations. We are not your retail electric provider; enrollment, if you continue, is a contract with the provider named in the offer. See our privacy policy and terms.

How this connects to our Fort Worth utility estimate

On our Fort Worth utility cost page, the electric figure is a delivery charge plus a representative supply benchmark for Oncor Electric Delivery (TDU Delivery – DFW area), last checked 2026-10-18. It is about $185.06 at 1,000 kWh. That date is the estimate check, not the date of the offers in the tool.

Our Fort Worth utility model treats electric as competitive retail supply layered on TDU delivery—consistent with how Choose Texas Power and similar aggregators describe Oncor’s pass-through delivery charge alongside a separately marketed supply rate. That split is why two households on the same cul-de-sac can see different supply brands but share the same outage-restoration workforce.

Housing in Fort Worth skews toward single-family lots and long cooling seasons. Load profiles often differ from denser urban cores: higher shoulder-month AC use, deeper setbacks, and more irrigation pumps on larger parcels can push you into a different kWh band than a downtown condo comparison.

This guide is for people comparing “Fort Worth electricity providers” in the plain language sense—meaning REP offers tied to your ESI ID—not for City of Fort Worth water, wastewater, or sanitation lines, which bill separately through municipal channels. If you are in an enclave with different TDU service or a special arrangement, your bill header—not the ZIP label alone—is the source of truth.

Fort Worth, Oncor, and the difference between “electric company” brands

Oncor Electric Delivery is the PUCT-regulated TDU for many Fort Worth-area accounts. Its tariffs recover pole, wire, and distribution work; those charges pass through retail bills under rules separate from the REP’s supply marketing. When neighbors argue about “electric rates,” they are often debating supply while assuming delivery is fixed—it usually is not frozen forever when filings update.

Retail electric providers compete on supply price components, contract lengths, renewable products, and billing conveniences. A lower advertised rate at 1,000 kWh does not automatically win if your home routinely lands at 1,800 kWh during a July heat dome or if you trigger minimum-usage clauses during mild months.

What to check before you switch

  • What will a plan cost at my usage?

    Read the Electricity Facts Label at 500, 1,000, and 2,000 kWh, and at your own typical month if you have it. A price advertised at 1,000 kWh can be higher or lower at the amount you actually use.

  • What if I miss a bill credit?

    Many credits apply only if you use at least a stated number of kilowatt-hours. Use less than that and you pay the rate without the credit. The label states the threshold and what the price becomes.

  • What should I check before switching?

    Confirm the electric company on your bill, the contract end date, and any early cancellation fee. Then compare the Electricity Facts Label with the offer in the tool. Utility Rates is not the provider. If you enroll, the contract is with the company named in the offer.

Other moving costs

Switching electricity does not change water, sewer, or trash. Those charges, and the full monthly estimate, are on the Fort Worth utility cost page.

Official references we use for governance context

Utility Rates verifies municipal water, sewer, and trash sources on our Fort Worth city page on a published cadence. Retail electric offers in the partner comparison tool can change; we do not independently scrape REP pricing hourly. Confirm numbers in the EFL, PowerToChoose, and your REP contract packet before you rely on them for budgeting.

Electricity plan types

These are contract shapes, not a ranking of providers. The Electricity Facts Label for the offer you are looking at is the document that states the price, the term, and the fees.

Plan typeWhat it can doWhat to check
Fixed rateThe energy price in the contract stays the same for the term.Delivery charges can still change. Read the early cancellation fee.
Variable rateYou are not locked into a long fixed price.The price can move each month. There may be no cancellation fee because there is no fixed term.
Bill creditThe bill drops if your usage lands in the band the credit requires.The credit usually disappears if you use less than the stated kilowatt-hours. Compare 500, 1,000, and 2,000 kWh.
PrepaidYou pay for electricity before you use it.Fees, how the balance is refilled, and what happens if the balance runs out.
RenewableThe product claims renewable energy or renewable credits.The renewable percentage on the label, and whether that claim costs more than a similar plan.

Why 500, 1,000, and 2,000 kWh matter

Texas shopping sites show an average price at those three usage levels because a bill credit or a minimum-use rule can make the same plan cheap at one level and expensive at another. A household that uses about 1,000 kWh in mild months and well above that in summer should read all three columns, then compare them with a recent bill.

Example, not a current offer: a plan advertises a $100 credit once usage reaches 1,000 kWh. At 1,000 kWh the credit applies. At 999 kWh it does not, so the bill can jump even though usage barely changed. The Electricity Facts Label states the threshold.

How to read an Electricity Facts Label

  • Check the average price at 500, 1,000, and 2,000 kWh, not only the largest number in the ad.
  • Separate the energy charge from the delivery charge. Switching providers does not replace the delivery utility.
  • Find bill credits, the usage required to get them, and when they end.
  • Read the term, the early cancellation fee, and whether the plan becomes month-to-month afterward.
  • Confirm the delivery utility on the label matches the company on your bill before you enroll.

Frequently asked questions

Yes for the offers the tool returns. When you enter an eligible Texas service address, the comparison shows current partner plan listings at that moment—prices, contract terms, credits, and availability can change during the day. Utility Rates does not republish a static daily rate table on this page. Separate city utility estimates on Utility Rates use their own last-verified dates and are budget benchmarks, not live enrollment offers. Always read the provider’s Electricity Facts Label before you enroll.
Often yes for Oncor-served competitive accounts: you choose a REP for supply while Oncor maintains delivery. Always confirm your TDU on a recent bill or enrollment tool—edge cases and special arrangements exist near municipal boundaries.
Our Fort Worth electric estimate splits regulated delivery from illustrative supply using the same choosetexaspower.org–style methodology cited in our data source note. That framing is intentional so readers do not assume the city sets supply rates.
No. Retail electric supply is billed through your REP relationship (sometimes consolidated on the same invoice). City water, wastewater, and sanitation follow Fort Worth adopted rate schedules—see our Fort Worth utility page for those verified figures.
Treat paid ads as lead generation. The EFL and Terms of Service are the binding disclosure artifacts Texas rules require. If an ad claims a price your EFL cannot support at your usage, pause and ask the REP to clarify before you authorize a credit check.
Metering and credit may differ, but the underlying choice model is similar where retail competition applies. Lease clauses sometimes specify billing responsibility; read your lease alongside the shopping tool output before switching.
City-side research aligns with the last verification dates shown on our Fort Worth utility card (electric source last verified 2026-03-13). Editorial copy on this shopping guide was last revised 2026-06-05. Live REP offers are not continuously synchronized here.
In most cases, no. For a standard switch between competitive retail electric providers on an existing residential meter, your new provider and your transmission and distribution utility (TDU) typically coordinate the change electronically—an appointment at your home is not usually required simply to change supply companies. A technician may need access for new service, suspected meter or equipment problems, or safety-related orders from the utility; those are different from completing enrollment through a shopping or comparison flow. Your confirmation email and terms from the enrolling provider will say if anything non-routine applies. If no visit is mentioned, you can ordinarily expect the switch to proceed without someone entering your home.

More from Utility Rates